|
 YD-5E HVLP Touch up Spray Gun
| Fluid Tip Size(I.D.)mm |
1.0mm |
| Air Pressure (Bar) |
29 (2) |
| Air Inlet |
1/4" |
| Fluid Inlet |
M10*1.0 |
| Air Consumption Nl/Min(CFM) |
115 (4.1) |
| Weight (g) |
320 |
| Capacity of Cup (C.C.) |
125 |
 Optional Nozzle Size : 0.5mm, 0.8mm, 1.0mm, 1.2mm, 1.4mm
All wet parts are made by stainless steel
Excellent atomization of both solvent and waterbased materials
Used for spot repair to medium paint job
Less pollution to environment, high transfer efficiency and save cost
Small/lightweight and can reach hard accessible area. |
<click> |
| |
<click> |
YD-5E-SC HVLP Touch up Spray Gun
| Fluid Tip Size(I.D.)mm |
1.0mm |
| Air Pressure (Bar) |
29 (2) |
| Air Inlet |
1/4" |
| Fluid Inlet |
M10*1.0 |
| Air Consumption Nl/Min(CFM) |
115 (4.1) |
| Weight (g) |
450 |
| Capacity of Cup (C.C.) |
400 |
Optional Nozzle Size : 0.5mm, 0.8mm, 1.0mm, 1.2mm, 1.4mm
All wet parts are made by stainless steel
Excellent atomization of both solvent and waterbased materials
Used for spot repair to medium paint job
Less pollution to environment, high transfer efficiency and save cost
Small/lightweight and can reach hard accessible area. |
| ...................................................................................................................................................................................................................... |
YD-1000-MP-S Middle Pressure Spray gun
| Fluid Tip Size(I.D.)mm |
1.6mm |
| Air Pressure (Bar) |
2.5 |
| Air Inlet |
1/4" |
| Fluid Inlet |
3/8" |
| Air Consumption (L/Min) |
280 |
| Weight (g) |
820 |
| Capacity of Cup (C.C.) |
1000 |
| Type |
Middle Pressure-Suction |
Stainless steel paint nozzle, needle and other parts that fluid pass through.
Suitable for the application of both waterborne and solvent materials.
High speed application and fine atomization.
Optimum finish results in all field of application.
Available nozzle size: 1.0mm, 1.3mm, 1.4mm, 1.6mm, 1.8mm, 2.0mm and 2.5mm
|
<click> |
| ...................................................................................................................................................................................................................... |
<click> |
YD-1000-MP-P Pressure Type Spray Gun
| Fluid Tip Size(I.D.)mm |
1.0mm |
| Air Pressure (Bar) |
2.5 |
| Air Inlet |
1/4" |
| Fluid Inlet |
3/8" |
| Air Consumption (L/Min) |
420 |
| Weight (g) |
500 |
| Type |
Pressure Type |
Pressure type spray gun for large painting area and high viscosity material.
Stainless steel paint nozzle, needle and other parts that fluid pass through.
Suitable for the application of both waterborne and solvent materials.
Wide fan, high material flow rate and fine atomization.
Available nozzle size: 1.0mm, 1.3mm, 1.4mm, 1.6mm, 1.8mm, 2.0mm and 2.5mm |
| ...................................................................................................................................................................................................................... |
<click> |
YD-1000-MP-SC
Middle Pressure Spray gun
| Fluid Tip Size(I.D.)mm |
1.3mm |
| Air Pressure (Bar) |
2 |
| Air Inlet |
1/4" |
| Fluid Inlet |
1/4" |
| Air Consumption (L/Min) |
280 |
| Weight (g) |
640 |
| Capacity OF Cup (C.C.) |
400 |
| Type |
Middle pressure- Side Cup |
Stainless steel paint nozzle, needle and other parts that fluid pass through.
Suitable for the application of both waterborne and solvent materials.
High speed application and fine atomization.
Optimum finish results in all field of application.
Available nozzle size: 1.0mm, 1.3mm, 1.4mm, 1.6mm, 1.8mm, 2.0mm and 2.5mm |
| ...................................................................................................................................................................................................................... |
YD-1000 H.V.L.P. Gravity Cup
| Fluid Tip Size(I.D.)mm |
1.3mm |
| Air Pressure (PSI) |
1.5-2.0 /21.75-29 |
| Air Inlet |
1/4" |
| Fluid Inlet |
M 16*1.5 |
| Air Consumption L/Min(CFM) |
350 |
| Weight (G) / With Cup |
425/600 |
| Capacity OF Cup (L) |
0.6 |
| Type |
HVLP-Gravity Cup |
Forged gun body.
High transfer efficiency: Reduce overspray and save painting cost. |
<click> |
Top quality spraying result makes this spray gun the ideal for manufacturing, building sector, and automotive industry.
Spray pattern: 30cm
Available size: 1.0mm, 1.3mm, 1.6mm, 1.8mm and 2.0mm |
......................................................................................................................................................................................................................
<click> |
YD-1000 Middle Pressure-Gravity Type
| Fluid Tip Size(I.D.)mm |
 1.3 |
Air Pressure KG/cm (PSI) |
1.5-2.0 /21.75-29 |
| Air Inlet |
1/4" |
| Fluid Inlet |
M16*1.5 |
| Air Consumption L/Min(CFM) |
280 |
| Weight (G) / With Cup |
425/600 |
| Capacity OF Cup (L) |
0.6 |
| Type |
Middle Pressure-Gravity Type |
Forged gun body
MP combines the advantages of HLVP and conventional spray gun: lower inlet pressure but high work rate.
MP provides the finest result and still saves material at the same time.
Spray pattern: 25 cm
Available size: 1.0mm, 1.3mm, 1.6mm, 1.8mm and 2.0mm |
......................................................................................................................................................................................................................
YD-1000 BP-Gravity Type
| Fluid Tip Size(I.D.)mm |
2.5 |
| Air Pressure KG/cm(PSI) |
1.5-2.0 /21.75-29 |
| Air Inlet |
1/4" |
| Fluid Inlet |
M16*1.5 |
| Air Consumption L/Min(CFM) |
250 |
| Weight (G) / With Cup |
425/600 |
| Capacity OF Cup (L) |
0.6 |
| Type |
Gravity Type |
Forged gun body and new air cap design for finest atomization.
Suitable for polyester, filler or other high viscosity materials.
BP gun can spray from small spot repairs to large surfaces.
Spray pattern: about 19 cm |
<click> |
......................................................................................................................................................................................................................
 |
YD-900 H.V.L.P SPRAY GUN
| Fluid Tip Size(I.D.)mm |
1.4mm |
| Air Pressure KG/cm(Bar/PSI) |
3 (43) |
| Air Inlet |
1/4" |
| Fluid Inlet |
M16*1.5 |
| Air Consumption l/min(cfm) |
250-320(8.8-11.3) |
| Weight (g) |
750 |
| Capacity OF Cup (L) |
0.6 |
Optional Nozzle Size: 1.7mm, 2.0mm and 2.5mm
Stainless steel nozzle, needle and fluid passages for maximum protection against corrosion. (suitable for water base product).
High transfer efficiency and excell atomizing performance
Gun body is gravity die-casting. More durability and more strength. Gun body could be anodized. More gun body color available. |
......................................................................................................................................................................................................................
YD-800 H.V.L.P. SPRAY GUN
| Fluid Tip Size(I.D.)mm |
1.4mm |
| Air Pressure (PSI) |
3 (43) |
| Air Inlet |
1/4" |
| Fluid Inlet |
M 16x1.5 |
| Air Consumption L/Min(CFM) |
250-320 (8.8-11.3) |
| Weight (Kg) |
0.8 |
| Capacity OF Cup (L) |
0.6 |
Extremely lightness means about 40% lighter than similar sizw spray gun.
Excellent in water-borne materials.
High temperature resistance and chemical resistance. |
 |
......................................................................................................................................................................................................................
 |
YD-401
H.V.L.P. SPRAY GUN
| Fluid
Tip Size(I.D.)mm |
1.0 |
| Air
Pressure KG/cm(PSI) |
3.5-5
(50-70) |
| Air
Inlet |
1/4
NPS (M) |
| Fluid
Inlet |
3/8
NPS (M) |
| Air
Consumption L/Min(CFM) |
310-370
(11-13) |
| Weight
(Kg) |
1.2 |
| Capacity
OF Cup (L) |
1.0 |
| Type |
Low
Pressure |
Optional
Nozzle Size : 0.8mm
, 1.4mm
, 1.6mm
, 1.8mm
Over
spray reduction
Excellent
atomization. |
......................................................................................................................................................................................................................
YD-402
H.V.L.P. SPRAY GUN
| Fluid
Tip Size(I.D.)mm |
1.0 |
| Air
Pressure KG/cm(PSI) |
3.5-5
(50-70) |
| Air
Inlet |
1/4
NPS (M) |
| Fluid
Inlet |
3/8
NPS (M) |
| Air
Consumption L/Min(CFM) |
310-370
(11-13) |
| Weight
(Kg) |
1.2 |
| Capacity
OF Cup (L) |
1.0 |
| Type |
Low
Pressure |
Optional
Nozzle Size : 0.8mm
, 1.4mm
, 1.6mm
, 1.8mm
Over
spray reduction
Less
pollution to environment. |
 |
......................................................................................................................................................................................................................
 |
YD-403
H.V.L.P. SPRAY GUN
| Fluid
Tip Size(I.D.)mm |
1.6 |
| Air
Pressure KG/cm(PSI) |
3.5-5
(50-70) |
| Air
Inlet |
1/4
NPS (M) |
| Fluid
Inlet |
3/8
NPS (M) |
| Air
Consumption L/Min(CFM) |
310-370
(11-13) |
| Weight
(Kg) |
1.2 |
| Capacity
OF Cup (L) |
1.0 |
| Type |
Suction
, Low Pressure |
Optional
Nozzle Size : 0.8mm
, 1.4mm
, 1.6mm
, 1.8mm
Over
spray reduction
Less
pollution to environment. |
|
| |
......................................................................................................................................................................................................................
TOP
|
